Black barn door hardware. Brushed barn door hardware. Hardware Only, Not including Door Panel Material:Steel Color:Black. The height from top of the door to the top of the roller is 130mm(5 3/25″), please at least 150mm(6″) for installation -The gap between door and wall is 16mm(16/25″) based on door thickness 40mm(1 4/7″) -Door panel need to be cut a groove for floor guide, Groove Height:1″Width:3/5″ -Can be used for studs wall that length between two studs are 16 -Two rollers can bear one door panel MAX weight 90kg -10FT track is 2 piece 5ft track with a track connector. The connector is shorter than track, rollers can slide across it. 10FT double door hardware kit can be used for per door width up to 30. 2.44m(8ft) kit’s including. 3.66m(12ft) kit’s including. Track connector1(combine two tracks together). 3m(10ft) kit’s including. The height from top of the door to the top of the roller is 130mm(5 3/25″), please at least 150mm(6″) for installation The gap between door and wall is 16mm(16/25″) based on door thickness 40mm(1 4/7″) Door panel need to be cut a groove for floor guide, Groove Height:1″Width:3/5″ Step 1: Drill wall Locate and mark the holes for the five flanges used to install the rail. Be sure to align your markings with the level before drilling. Step 2: Attach the rail to the wall Attach the rail with the flanges and screws provided. Note: If you havent removed the mouldings, you will need longer screws than those supplied (not included). Step 3: Attach the single bearing supports Trace the exact position of the supports and pre-drill the holes before installing the supports on the door. Step 4: Install the jump-proof devices Install the two jump-proof devices, as illustrated. Step 5: Install the door and adjust jump-proof devices Place the assembled door on the rail. Reposition the two jump-proof devices by rotating them so that they are completely on the edge of the door. Step 6: Install the floor guide Mark the thickness of the door (Y) on the floor, approximately 1 cm (13/32) from door opening, on the side where the door will slide. Use a level to make sure the lines are parallel to the wall. Step 7: Door bumpers If needed, adjust the position of the bumpers installed during step 2. The bumpers will prevent the door from sliding off the rail when the installation is complete. If you received demaged packages, pls refuse to sign the package. If you signed the goods and find any demages, pls take outter package photo and inner demaged goods’ photo for us, we will try our best to solve it. 8/10/12ft Industrial Wheel Double Sliding Barn Wood Door Track Hardware. Two side Soft close Barn Door Hardware Big Spoke Wheel Barn Door Track Kit. 8ft Sliding barn door wood door hardware rustic black barn sliding track. White Color Straight Country Style Sliding Barn Wood Door Track Hardware Kit. Stainless Steel Rustic Black Sliding Barn Door Handle Wood door handle and pull. The item “DIYHD 8FT/10FT/12FT Rustic black arrow wheel double sliding barn door hardware” is in sale since Saturday, April 02, 2016. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “sliding-barn-door” and is located in Carol Stream. This item can be shipped to United States.
- Brand: DIYHD
- Country/Region of Manufacture: China