6FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

6FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

6FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

6FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

6FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

6FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

6FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

6FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

Hardware Only, No Door Panel. Material:Steel;Surface:Brushed Nickel. Bypass system require high space(at least 11 13/20) from top of the door to the ceiling, pls check your openning space before order. The gap between two doors are 2″ based on the door thickness40mm(1 3/5″) , we don’t have better way to reduce this gap. Customers can use thickness 45mm(1 3/4) door panel to reduce a little. Our suggestion is to make door panel more wider than openning(openning/2+4) to cover the sight between two door’s gap. Track had been pre-drilled 16″ apart holes, can be used for 16″ apart studs wall. The bypass system need drill 3 line holes on the wall. It’s very important to double check the level to make all of them in same height. Door panel need to pre-cut a groove(Width 3/5″;Height 1″) , pls let your door maker finish this job when you order the door. The item “6FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware” is in sale since Saturday, April 15, 2017. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “shengyinhardware” and is located in Carol Stream,IL. This item can be shipped to United States.
  • Brand: DIYHD
  • MPN: 04BNBY6FT
  • Country/Region of Manufacture: China

6.6FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

6.6FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

6.6FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

6.6FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

6.6FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

6.6FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

6.6FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

6.6FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

Hardware Only, No Door Panel. Material:Steel;Surface:Brushed Nickel. Bypass system require high space(at least 11 13/20) from top of the door to the ceiling, pls check your openning space before order. The gap between two doors are 2″ based on the door thickness40mm(1 3/5″) , we don’t have better way to reduce this gap. Customers can use thickness 45mm(1 3/4) door panel to reduce a little. Our suggestion is to make door panel more wider than openning(openning/2+4) to cover the sight between two door’s gap. Track had been pre-drilled 16″ apart holes, can be used for 16″ apart studs wall. The bypass system need drill 3 line holes on the wall. It’s very important to double check the level to make all of them in same height. Door panel need to pre-cut a groove(Width 3/5″;Height 1″) , pls let your door maker finish this job when you order the door. The item “6.6FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware” is in sale since Friday, July 15, 2016. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “shengyinhardware” and is located in Carol Stream,IL. This item can be shipped to United States.
  • Brand: DIYHD
  • MPN: 04BNBY6.6FT
  • Country/Region of Manufacture: China

DIYHD 8FT Brushed Nickel Sliding Barn Door Hardware Interior Steel Barn Wood

DIYHD 8FT Brushed Nickel Sliding Barn Door Hardware Interior Steel Barn Wood

DIYHD 8FT Brushed Nickel Sliding Barn Door Hardware Interior Steel Barn Wood

DIYHD 8FT Brushed Nickel Sliding Barn Door Hardware Interior Steel Barn Wood

DIYHD 8FT Brushed Nickel Sliding Barn Door Hardware Interior Steel Barn Wood

DIYHD 8FT Brushed Nickel Sliding Barn Door Hardware Interior Steel Barn Wood

DIYHD 8FT Brushed Nickel Sliding Barn Door Hardware Interior Steel Barn Wood Door Sliding Track Kit. Hardware Only, Not including door panel. Material:Stainless Steel, Color:Brushed satin;Suitable for door thickness 35-40mm. Two rollers can bear MAX weight 90kg. Package’s including:Roller2;Stopper2;Sliding track1;Track&wall connector6;Anti-pad2;Floor guide1. Track had been pre-drilled 16 apart holes, 8FT is one piece track. Hardware Only, Not including door panel; 2. Track had been pre-drilled 16″ apart holes, if your wall is drywall+studs, pls check if it’s 16″ between two studs before you order the kit; 3. Track’s two end had been pre-drilled holes for track connector to fix two tracks to be a longer one for double door system; 4. Track connector is a little bit shorter than track so it allow rollers slide one side to the other side; 5. The height from top of the door to the top of the roller is about 130mm, the gap bewteen door(thickness 40mm) and wall is 16mm. We usually respond within 24 hours on weekdays. Thank you for shopping at our store. The item “DIYHD 8FT Brushed Nickel Sliding Barn Door Hardware Interior Steel Barn Wood” is in sale since Wednesday, October 04, 2017. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “hiddengifts4u” and is located in Multiple Locations. This item can be shipped to United States.
  • MPN: SS138fts
  • Brand: DIYHD
  • Model: SS138fts

DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware

DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware

DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware

DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware

DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware

DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware

DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware

DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware

DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware

The height from top of the door to the top of the roller is 188mm(7 2/5), pls check if your wall have enough space to install this kit before order! The gap between door and wall is 16mm(16/25″), if you have thick(thickness more than 1/2″) baseboard or door frame, pls try to add a wood board on the back side of the track to make a bigger gap The MAX load for basic item is 90kgs Track had been pre-drilled 16″ apart holes, can be used for 16″ apart studs wall Two sides of the track’s end also pre-drilled small screw holes for customer who what to creat double sliding barn door system. Hardware Material:Steel, Nylon, POM Surface:Brushed Nickel The J shape material is metal The spoke wheel is hard plastic/nylon All of our barn door wheel is hard plastic to reduce the noice during sliding 5ft/5.5ft-single door kit including: Roller2pcs Stop2pcs 5ft/5.5ft track1pcs Track&wall connector4pcs Anti-pad2pcs Floor guide1pcs 6ft/6.6ft-single door kit including: Roller2pcs Stop2pcs 6ft/6.6ft track1pcs Track&wall connector5pcs Anti-pad2pcs Floor guide1pcs 8ft-single door kit including: Roller2pcs Stop2pcs 8ft track1pcs Track&wall connector6pcs Anti-pad2pcs Floor guide1pcs 10ft-single door kit including: Roller2pcs Stop2pcs 5ft track2pcs Track connector1pcs Track&wall connector8pcs Anti-pad2pcs Floor guide1pcs 10ft/11ft-double door kit including: Roller4pcs Stop4pcs 5ft/5.5ft track2pcs Track connector1pcs Track&wall connector8pcs Anti-pad4pcs Floor guide2pcs 12ft/13ft-double door kit including: Roller4pcs Stop4pcs 6ft/6.6ft track2pcs Track connector1pcs Track&wall connector10pcs Anti-pad4pcs Floor guide2pcs 16ft-double door kit including: Roller4pcs Stop4pcs 8ft track2pcs Track connector1pcs Track&wall connector12pcs Anti-pad4pcs Floor guide2pcs. The item “DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware” is in sale since Tuesday, August 15, 2017. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Doors”. The seller is “sliding-barn-door” and is located in PA. This item can be shipped to United States.
  • Material: Steel
  • Type: Sliding Door
  • Color: brushed nickel
  • Country/Region of Manufacture: China
  • Brand: DIYHD
  • Closing Mechanism: Sliding

5FT Single Sliding Barn Door Hardware Kit Stainless Steel 304 Brushed Nickel 304

5FT Single Sliding Barn Door Hardware Kit Stainless Steel 304 Brushed Nickel 304

5FT Single Sliding Barn Door Hardware Kit Stainless Steel 304 Brushed Nickel 304

5FT Single Sliding Barn Door Hardware Kit Stainless Steel 304 Brushed Nickel 304

5FT Single Sliding Barn Door Hardware Kit Stainless Steel 304 Brushed Nickel 304

5FT Single Sliding Barn Door Hardware Kit Stainless Steel 304 Brushed Nickel 304

5FT Single Sliding Barn Door Hardware Kit Stainless Steel 304 Brushed Nickel 304

5FT Single Sliding Barn Door Hardware Kit Stainless Steel 304 Brushed Nickel 304

5FT Single Sliding Barn Door Hardware Kit Stainless Steel 304 Brushed Nickel 304

5FT Single Sliding Barn Door Hardware Kit Stainless Steel 304 Brushed Nickel 304

5FT Single Sliding Barn Door Hardware Kit Stainless Steel 304 Brushed Nickel 304

5FT Single Sliding Barn Door Hardware Kit Stainless Steel 304 Brushed Nickel 304

5FT Single Sliding Barn Door Hardware Kit Stainless Steel 304 Brushed Nickel 304

See our other listings. Surface: Wire drawing technology, manufactured by integral moulding, smooth surface with silver bright, metal luster. Main Material: High quality 304 Stainless steel, high corrosion resistance, sturdy & durable & anti-corrosion. Track and Roller Arm Thickness: 6 mm. Stopper: Rubber covered, good damping effect, reduce noise. Roller bearing: High purity bearing steel Gcr15, wear resistance, stability and fluency. The sliding rail: Precision reserved hole design, easy to install. Floor guide: POM, toughness, good wear resistancevibration-resistance performance. Use for: Single door. Door panel thickness: 35/40mm. Door Max Weight: 150lb. Track’s length should be twice of your door panel’s width. The gap between THK 40 mm door panel and the wall is about 16 mm, height from the top of the door panel to ceiling is about 150 mm for reference. Only hardware is for sale. Door is not included. Track’s length should be twice of your door panel’s width, please select the length based on the door panel or opening. Customers’ issues such as: no longer needed, don’t like, bought by mistake, etc. Craftsmanship, excellence and innovation are our primary pursuits. We enjoy the working with raw materials to make them into something extraordinary. Based in Shenyang, China. Winsoon has the natural local advantages of making outstanding sliding hardware track set. The talent and craftwork are the cornerstone of our company. We take pride in everything we produce. We lead the way in sliding barn door hardware, trustful quality and workmanship is what you can expect when you choose Winsoon. Portions of the part information on this page have been provided by winsoon. The item “5FT Single Sliding Barn Door Hardware Kit Stainless Steel 304 Brushed Nickel 304″ is in sale since Thursday, May 25, 2017. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “winsoonhardware” and is located in SHEN YANG. This item can be shipped worldwide.
  • Brand: winsoon hardware
  • Type: Sliding Barn door hardware
  • MPN: Does Not Apply
  • Bundle Listing: No
  • Country/Region of Manufacture: China

8ft Brushed Nickel Two side Soft Close Sliding Barn Door Hardware

8ft Brushed Nickel Two side Soft Close Sliding Barn Door Hardware

8ft Brushed Nickel Two side Soft Close Sliding Barn Door Hardware

8ft Brushed Nickel Two side Soft Close Sliding Barn Door Hardware

8ft Brushed Nickel Two side Soft Close Sliding Barn Door Hardware

8ft Brushed Nickel Two side Soft Close Sliding Barn Door Hardware

8ft Brushed Nickel Two side Soft Close Sliding Barn Door Hardware

8ft Brushed Nickel Two side Soft Close Sliding Barn Door Hardware

Only hardware for sale, Door is not included. Material:Steel, POM Surface:Brushed Nickel Track’s length should be twice of your door panel’s width Suitable for door panel thickness:35-40-45mm. Soft close kit can bear per door MAX weight:80kgs. The height from top of the door to the top of the roller is 130mm, pls leave at least 150mm for installation. The track’s two end have been pre-drilled holes(using a tracking connector to make two track to be a longer one), we will offer hole plugs for you if you don’t want to see it. The track has been pre-drilled 16 apart holes. Single door kit: 8FT hardware’s including: Roller:2pcs Stopper:2pcs Sliding track:1pcs8FT Track&wall connector+screws:6pcs Anti-jump pad:2pcs Floor guide:1pcs Soft close kit2 set. Pre-drilled 16 apart center holes on the track. The item “8ft Brushed Nickel Two side Soft Close Sliding Barn Door Hardware” is in sale since Saturday, April 09, 2016. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “shengyinhardware” and is located in Carol Stream,IL. This item can be shipped to United States.
  • Brand: DIYHD
  • MPN: 168fts
  • Country//Region of Manufacture: China

8FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

8FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

8FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

8FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

8FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

8FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

8FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

8FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware

Hardware Only, No Door Panel. Material:Steel;Surface:Brushed Nickel. Bypass system require high space(at least 11 13/20) from top of the door to the ceiling, pls check your openning space before order. The gap between two doors are 2″ based on the door thickness40mm(1 3/5″) , we don’t have better way to reduce this gap. Customers can use thickness 45mm(1 3/4) door panel to reduce a little. Our suggestion is to make door panel more wider than openning(openning/2+4) to cover the sight between two door’s gap. Track had been pre-drilled 16″ apart holes, can be used for 16″ apart studs wall. The bypass system need drill 3 line holes on the wall. It’s very important to double check the level to make all of them in same height. Door panel need to pre-cut a groove(Width 3/5″;Height 1″) , pls let your door maker finish this job when you order the door. The item “8FT Brushed Nickel One piece Bypass Sliding Barn Door Hardware” is in sale since Saturday, April 15, 2017. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “shengyinhardware” and is located in Carol Stream,IL. This item can be shipped to United States.
  • Brand: DIYHD
  • MPN: 04BNBY8FT
  • Country/Region of Manufacture: China

5FT Single Stainless Steel Sliding Barn Door Hardware Kit brushed nickel Bar new

5FT Single Stainless Steel Sliding Barn Door Hardware Kit brushed nickel Bar new

5FT Single Stainless Steel Sliding Barn Door Hardware Kit brushed nickel Bar new

5FT Single Stainless Steel Sliding Barn Door Hardware Kit brushed nickel Bar new

5FT Single Stainless Steel Sliding Barn Door Hardware Kit brushed nickel Bar new

5FT Single Stainless Steel Sliding Barn Door Hardware Kit brushed nickel Bar new

5FT Single Stainless Steel Sliding Barn Door Hardware Kit brushed nickel Bar new

5FT Single Stainless Steel Sliding Barn Door Hardware Kit brushed nickel Bar new

5FT Single Stainless Steel Sliding Barn Door Hardware Kit brushed nickel Bar new

5FT Single Stainless Steel Sliding Barn Door Hardware Kit brushed nickel Bar new

5FT Single Stainless Steel Sliding Barn Door Hardware Kit brushed nickel Bar new

5FT Single Stainless Steel Sliding Barn Door Hardware Kit brushed nickel Bar new

See our other listings. Surface: Wire drawing technology, manufactured by integral moulding, smooth surface with silver bright, metal luster. Main Material: High quality 304 Stainless steel, high corrosion resistance, sturdy & durable & anti-corrosion. Track and Roller Arm Thickness: 6 mm. Stopper: Rubber covered, good damping effect, reduce noise. Roller bearing: High purity bearing steel Gcr15, wear resistance, stability and fluency. The sliding rail: Precision reserved hole design, easy to install. Floor guide: POM, toughness, good wear resistancevibration-resistance performance. Use for: Double door & Single door. Door panel thickness: 35/40mm. Door Max Weight: 150lb – 230lb. Track’s length should be twice of your door panel’s width. The gap between THK 40 mm door panel and the wall is about 16 mm, height from the top of the door panel to ceiling is about 150 mm for reference. Only hardware is for sale. Door is not included. Customers’ issues such as: no longer needed, don’t like, bought by mistake, etc. Craftsmanship, excellence and innovation are our primary pursuits. We enjoy the working with raw materials to make them into something extraordinary. Based in Shenyang, China. Winsoon has the natural local advantages of making outstanding sliding hardware track set. The talent and craftwork are the cornerstone of our company. We take pride in everything we produce. We lead the way in sliding barn door hardware, trustful quality and workmanship is what you can expect when you choose Winsoon. Portions of the part information on this page have been provided by winsoon. The item “5FT Single Stainless Steel Sliding Barn Door Hardware Kit brushed nickel Bar new” is in sale since Tuesday, April 11, 2017. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “winsoonhardware” and is located in SHEN YANG. This item can be shipped worldwide.
  • Brand: winsoonhardware
  • MPN: Does Not Apply
  • Color: silver
  • Type: Sliding Door Track
  • Featured Refinements: Sliding Barn Door Hardware
  • Bundle Listing: No
  • Country/Region of Manufacture: China

6.6ft Brushed Nickel Two-Side Soft Closing Sliding Barn Wood Door Hardware Kit

6.6ft Brushed Nickel Two-Side Soft Closing Sliding Barn Wood Door Hardware Kit

6.6ft Brushed Nickel Two-Side Soft Closing Sliding Barn Wood Door Hardware Kit

6.6ft Brushed Nickel Two-Side Soft Closing Sliding Barn Wood Door Hardware Kit

6.6ft Brushed Nickel Two-Side Soft Closing Sliding Barn Wood Door Hardware Kit

6.6ft Brushed Nickel Two-Side Soft Closing Sliding Barn Wood Door Hardware Kit

6.6ft Brushed Nickel Two-Side Soft Closing Sliding Barn Wood Door Hardware Kit

6.6ft Brushed Nickel Two-Side Soft Closing Sliding Barn Wood Door Hardware Kit

6.6ft Brushed Nickel Two-Side Soft Closing Sliding Barn Wood Door Hardware Kit

Only hardware for sale, Door is not included. Soft close/Soft open two side soft operation Material:Steel, POM Surface:Brushed Nickel Track’s length should be twice of your door panel’s width Suitable for door panel thickness:35-40-45mm. Soft close kit can bear per door MAX weight:90kgs. The height from top of the door to the top of the roller is 130mm, pls leave at least 150mm for installation. The track’s one end have been pre-drilled holes(using a tracking connector to make two track to be a longer one). The track has been pre-drilled 16 apart holes. Single door kit: 6.6FT single door kit including: Roller:2pcs Stopper:2pcs Sliding track:1pcs6.6FT Track&wall connector+screws:5pcs Anti-jump pad:2pcs Floor guide:1pcs Soft close kit:2 sets. Pre-drilled 16 apart center holes on the track. The item “6.6ft Brushed Nickel Two-Side Soft Closing Sliding Barn Wood Door Hardware Kit” is in sale since Friday, July 15, 2016. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “shengyinhardware” and is located in Carol Stream,IL. This item can be shipped to United States.
  • Brand: DIYHD
  • MPN: 04BN6.6fts
  • Country//Region of Manufacture: China

DIYHD 5ft-8ft Two side Soft Closing Brushed Nickel Sliding Barn Door Hardware

DIYHD 5ft-8ft Two side Soft Closing Brushed Nickel Sliding Barn Door Hardware

DIYHD 5ft-8ft Two side Soft Closing Brushed Nickel Sliding Barn Door Hardware

DIYHD 5ft-8ft Two side Soft Closing Brushed Nickel Sliding Barn Door Hardware

DIYHD 5ft-8ft Two side Soft Closing Brushed Nickel Sliding Barn Door Hardware

DIYHD 5ft-8ft Two side Soft Closing Brushed Nickel Sliding Barn Door Hardware

DIYHD 5ft-8ft Two side Soft Closing Brushed Nickel Sliding Barn Door Hardware

DIYHD 5ft-8ft Two side Soft Closing Brushed Nickel Sliding Barn Door Hardware

DIYHD 5ft-8ft Two side Soft Closing Brushed Nickel Sliding Barn Door Hardware

DIYHD 5ft-8ft Two side Soft Closing Brushed Nickel Sliding Barn Door Hardware

DIYHD 5ft-8ft Two side Soft Closing Brushed Nickel Sliding Barn Door Hardware

DIYHD 5ft-8ft Two side Soft Closing Brushed Nickel Sliding Barn Door Hardware

Black barn door hardware. Brushed barn door hardware. Hardware Only, Not including Door Panel. Material:Steel, Nylon, POM;Surface:Brushed. Two side soft close operation. The track had been pre-drilled 16 apart holes. Track’s two end had been pre-drilled small holes for track connector to make a long track. The height from top of the door to the top of the roller is 130mm(5 3/25″), please at least 150mm(6″) for installation. The gap between door and wall is 16mm(16/25″) based on door thickness 40mm(1 4/7″). Door panel need to be cut a groove for floor guide, Groove Height:1″Width:3/10″. 5FT/5.5FT soft closing kit including. Soft close plastic piece2(pre-fixed on the track). Soft close T trigger2. 8FT soft closing kit including. 6FT/6.6FT soft close kit including. Step1:Drill holes on the wall H is door panel’s height, H+45MM(1.77) is the place we need drill holes for track to tight screws. Step2:Adjust the soft close mechanism’s location to make two teeth visiable from the front side of the track(see step 7 on the photo manuel), then tight the track on the wall Step3:Drill holes on the door panel (see photo manuel step 3) and fix the wheels. Step4:The round dics are anti-pad, they can reduce the gap betweem door and track in case wheels jump off, pls definitely use them(any place on the top of the door and under the track) Step5:Hang wheels on the track. Step6:Install floor guide on the floor under the groove of the door panel Step7:Move two soft close mechanism’s teeth like option 1 Close the door, tight the T trigger on the bottom of the mechanism’s teeth. Open the door, tight the T trigger on the bottom of the mechanism’s teeth. Step8:Mount two stops of the two end of the track. If you find any missing or demage on the products pls take me outer package photo and demaged products photo ASAP, we will try our best to solve it. 8/10/12ft Industrial Wheel Double Sliding Barn Wood Door Track Hardware. Two side Soft close Barn Door Hardware Big Spoke Wheel Barn Door Track Kit. 8ft Sliding barn door wood door hardware rustic black barn sliding track. White Color Straight Country Style Sliding Barn Wood Door Track Hardware Kit. 5ft-8ft sliding barn door top mount stainless steel hardware safety pin wheel. The item “DIYHD 5ft-8ft Two side Soft Closing Brushed Nickel Sliding Barn Door Hardware” is in sale since Thursday, April 06, 2017. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “sliding-barn-door” and is located in Carol Stream. This item can be shipped to United States.
  • Brand: DIYHD
  • MPN: 04BN
  • Country/Region of Manufacture: China